Key information to help you specify the right configuration.
LU‑XG440B 20-100mm Spindle Spray Twist Off Pump Bottle Capping Machine is a capping machine from Lancing UK designed for pump, trigger or dispenser closures, bottle and jar capping. This page lists output at About 50-80 bottles/min; format guidance including Bottle height: 45-320mm; Cap diameter: 19-55mm; site requirements including Voltage: 220V 60HZ; Air pressure: 0.4-0.6Mpa.
Lancing UK can review your product, container or pack format, target speed and site requirements to confirm the right configuration before quotation.
Representative machine images.
Reference specification table. Final configuration is confirmed with the agreed scope, options and pack format.
| Parameter | Value |
|---|---|
| Parameter | Value |
| Machine Model | LU-XG440B |
| Voltage | 220V 60HZ |
| Capping Speed | About 50-80 bottles/min |
| Bottle height | 45-320mm |
| Botle diameter | 23-100mm |
| Cap diameter | 19-55mm |
| Capping Torsion | 4-9kgf/cm |
| Air pressure | 0.4-0.6Mpa |
| Max power | 300W |
Detailed layout and dimension drawings can be supplied during quotation and project planning where required.
Practical information to help compare this machine with alternative packaging solutions.
LU‑XG440B 20-100mm Spindle Spray Twist Off Pump Bottle Capping Machine is a capping machine from Lancing UK designed for pump, trigger or dispenser closures, bottle and jar capping. This page lists output at About 50-80 bottles/min; format guidance including Bottle height: 45-320mm; Cap diameter: 19-55mm; site requirements including Voltage: 220V 60HZ; Air pressure: 0.4-0.6Mpa.
This page lists output at About 50-80 bottles/min. Actual throughput depends on the product, container or pack format, changeover requirements and the wider line setup.
This page lists format guidance as Bottle height: 45-320mm; Cap diameter: 19-55mm. Final suitability is confirmed against your actual product and pack dimensions.
Typical requirements listed on this page include Voltage: 220V 60HZ; Air pressure: 0.4-0.6Mpa.
Yes. Lancing UK can review the product, pack format, required output, utilities and line-integration needs to confirm the right configuration before quotation.
We’ll confirm suitability, options, integration, and realistic throughput for your product.
Send a message and we’ll respond with configuration options, pricing guidance and lead times.
If LU‑XG440B 20-100mm Spindle Spray Twist Off Pump Bottle Capping Machine is close to the right shortlist, use these pages to compare the wider application, line challenge, guide and support routes around it.